ConTenTs 1. INTRODUCTION Presentation of Ahlsell Oil & Gas AS Typical products and materials of typical pipes, fittings and flan
CoMPAnY PResenTATIon How to contact us Stavanger Office Phone: +47 51 57 39 00 Fax: +47 51 81 86 50 E-mail: oil&gas@ahlsell.no I
CoMPAnY PResenTATIon Ahlsell Oil & Gas AS was in 2007 demerged from Ahlsell Norge AS. The roots of the company date back to 1933
Types of pipes, fittings and flanges in stock Sizes and material types: The below listed products are typical available from our
Austenittic Stainless steel - Type 316/316L Product Seamless pipe Welded pipe Wrought fitting Forging/flange Tube Standard ASTM
TyPes oF PiPes, FiTTings and Flanges in sTock High strength Austenittic Stainless steel - Type Superaustenite Product Welded pip
ahlsell 9
10 ahlsell
PIPES PIPes AsMe B36.10 AsMe B36.19 ahlsell 11
PiPe schedule charT [inch] ASME B36.19-B36.10 – pipe dimensions in inch and weights in kg NPS O.D. (INCH) (INCH) 5S 5 10 S 10 20
PiPe schedule charT [mm] ASME B36.19-B36.10 DN (MM) NPS (INCH) O.D. (MM) 5S 5 – pipe dimensions in mm and weights in kg 10 S 10
PiPes ASME B 36.10 DIMENSIONS SIzE IN. line PiPes WALL THICkNESS mm OUTSIDE DIAMETER mm INNER DIAMETER mm WEIGHT kG/M IDENTIFICA
line PiPes ASME B 36.10 DIMENSIONS SIzE IN. PIPes WALL THICkNESS mm OUTSIDE DIAMETER mm INNER DIAMETER mm WEIGHT IDENTIFICATION
PiPes ASME B 36.10 DIMENSIONS SIzE IN. line PiPes WALL THICkNESS OUTSIDE DIAMETER mm INNER DIAMETER WEIGHT kG/M IDENTIFICATION S
line PiPes ASME B 36.10 DIMENSIONS SIzE IN. PIPes WALL THICkNESS OUTSIDE DIAMETER mm INNER DIAMETER WEIGHT kG/M IDENTIFICATION S
PiPes ASME B 36.10 DIMENSIONS SIzE IN. line PiPes WALL THICkNESS OUTSIDE DIAMETER mm INNER DIAMETER WEIGHT kG/M IDENTIFICATION S
ahlsell 19
20 ahlsell
TuBes AsTM A269 AsTM A789 TUBES ahlsell 21
TuBing meTric sizes & Pressure in Bar FACTOR CHART FOR PRESSURE CALCULATION OF TUBING - METRIC The below table values are based
meTric sizes & Pressure in Bar WORkING PRESSURE FOR SEAMLESS ASTM A269 6MO - UNS S31254 (BAR) Allowable stress = 169 MPa between
TuBing FracTional sizes & Pressure in Psi FACTOR CHART FOR PRESSURE CALCULATION OF TUBING - FRACTIONAL The below table values ar
FracTional sizes & Pressure in Psi WORkING PRESSURE FOR SEAMLESS ASTM A269 6MO - UNS S31254 (PSI) Allowable stress = 24500 psi b
26 ahlsell
BuTT-Weld FiTTings BUTT-WELD FITTINGS AsMe B 16.9 mss sP-75 AsMe B 16.28 ahlsell 27
28 ahlsell
asme B16.9/ mss sP–75 Long radius elbows 90° long radius elbow BuTT-Weld FiTTings 45° long radius elbow B 45° A B 90° A ASME B16
BuTT-Weld FiTTings Tees Equal Tees asme B16.9/ mss sP–75 ASME B16.9 N.B. O.D. at Bevel 21,3 26,7 33,4 42,2 48,3 60,3 73,0 88,9 1
asme B16.9/ mss sP–75 Tees Reducing Outlet Tees BuTT-Weld FiTTings REDUCING OUTLET TEES (dimensions in mm) N.B. Run 1/2 1/2 3/4
BuTT-Weld FiTTings REDUCING OUTLET TEES (dimensions in mm) – continued N.B. Run 4 4 4 4 4 5 5 5 5 5 6 6 6 6 6 8 8 8 8 10 10 10 1
asme B16.9/ mss sP–75 REDUCING OUTLET TEES (dimensions in mm) – continued N.B. Run 26 26 26 26 26 26 26 28 28 28 28 28 28 28 28
BuTT-Weld FiTTings REDUCING OUTLET TEES (dimensions in mm) – continued N.B. Run 40 40 40 40 40 40 40 40 40 40 40 42 42 42 42 42
asme B16.9 Long Radius Bends BuTT-Weld FiTTings Long Radius Return Bends LONG RADIUS RETURN BENDS (dimensions in mm) ASME B16.9
BuTT-Weld FiTTings Reducers Concentric and eccentric reducers asme B16.9/ mss sP–75 REDUCERS (dimensions in mm) ASME B16.9 O.D.
asme B16.9/ mss sP–75 REDUCERS (dimensions in mm) - continued ASME B16.9 O.D. N.B. at Bevel L.E. S.E. L.E. S.E. 20 20 20 20 22 2
BuTT-Weld FiTTings Stub Ends Lap-Joint Stub Ends asme B16.9/ mss sP–43 LAP-JOINT STUB ENDS (dimensions in mm) ASME B16.9 - long
asme B16.9/ mss sP–75 BuTT-Weld FiTTings End Caps END CAPS (dimensions in mm) ASME B16.9 # N.B. 1/2 3/4 1 1 1⁄4 1 1⁄2 2 2 1⁄2 3
BuTT-Weld FiTTings Short radius elbows ASME B16.28 [mm] N.B. (inch) 1 1 1⁄4 1 1⁄2 2 2 1⁄2 3 3 1⁄2 4 5 6 8 10 12 14 16 18 20 22 2
asme B16.9 / mss sP–75 Bevel types Welding Bevel For Fittings – MSS SP – 75 (mm) 10 ± 1 0 0 BuTT-Weld FiTTings * 30 + 5 -0 0 0 0
BuTT-Weld FiTTings Tolerances mss sP–75 TOLERANCE (mm) FOR MSS SP–75 All Fittings Nominal Pipe Size Inside Diameter at End Wall
asme B16.9/ B16.28 TOLERANCES - ASME B16.9/B16.28 90-Deg and 45-Deg Elbows and Tees Inside Wall Diameter Thickat End ness (1), (
44 ahlsell
maniFold FiTTings MANIFOLD FITTINGS ahlsell 45
46 ahlsell
maniFold FiTTings Designed to meet international standard Manifold Fittings have been designed in accordance with the following
48 ahlsell
Flanges asme B16.5 FLANGES ASME B16.5 ahlsell 49
PiPe Flanges CLASS 150 FLANGES asMe B16.5 DIMENSIONS OF CLASS 150 FLANGES (mm) 1 2 3 4 5 6 7 8 9 10 11 SW Socket depth D 12 Bore
AsMe B16.5 CLASS 150 FLANGES PiPe Flanges k min. P O W R DIMENSIONS OF CLASS 150 FLANGES (mm) 15 16 17 18 19 20 21 22 23 24 25 2
PiPe Flanges CLASS 300 FLANGES asMe B16.5 DIMENSIONS OF CLASS 300 FLANGES (mm) 1 2 3 4 5 6 7 8 9 10 11 SW Socket depth D 12 Bore
AsMe B16.5 CLASS 300 FLANGES PiPe Flanges k min. P O W R DIMENSIONS OF CLASS 300 FLANGES (mm) 15 16 17 18 19 20 21 22 23 24 25 2
PiPe Flanges CLASS 400 FLANGES asMe B16.5 DIMENSIONS OF CLASS 400 FLANGES (mm) 1 2 3 4 5 6 7 8 9 10 11 SW Socket depth D 12 Bore
AsMe B16.5 CLASS 400 FLANGES PiPe Flanges k min. P O W R DIMENSIONS OF CLASS 400 FLANGES (mm) 15 16 17 18 19 20 21 22 23 24 25 2
PiPe Flanges CLASS 600 FLANGES asMe B16.5 DIMENSIONS OF CLASS 600 FLANGES (mm) 1 2 3 4 5 6 7 8 9 10 11 12 SW Socket depth D 13 B
AsMe B16.5 CLASS 600 FLANGES PiPe Flanges k min. P O W R DIMENSIONS OF CLASS 600 FLANGES (mm) 15 16 17 18 19 20 21 22 23 24 25 2
PiPe Flanges CLASS 900 FLANGES asMe B16.5 DIMENSIONS OF CLASS 900 FLANGES (mm) 1 2 3 4 5 6 7 8 9 10 11 SW Socket depth D 12 Bore
AsMe B16.5 CLASS 900 FLANGES PiPe Flanges k min. P O W R DIMENSIONS OF CLASS 900 FLANGES (mm) 15 16 17 18 19 20 21 22 23 24 25 2
PiPe Flanges CLASS 1500 FLANGES asMe B16.5 DIMENSIONS OF CLASS 1500 FLANGES (mm) 1 2 3 4 5 6 7 8 9 10 11 SW Socket depth D 12 Bo
AsMe B16.5 CLASS 1500 FLANGES PiPe Flanges k min. P O W R DIMENSIONS OF CLASS 1500 FLANGES (mm) 15 16 17 18 19 20 21 22 23 24 25
Asme B16.5 CLASS 2500 FLANGES PIPe FLANGes DIMENSIONS OF CLASS 2500 FLANGES (mm) 1 2 3 4 5 6 7 8 9 10 11 SW Socket depth D 12 Bo
PIPe FLANGes CLASS 2500 FLANGES Asme B16.5 K min. P O W R DIMENSIONS OF CLASS 2500 FLANGES (mm) 15 16 17 18 19 20 21 22 23 24 25
Asme B16.5 Tolerances B16.5 - 2003 DENOMINATION O DESCRIPTION Outside diameter flange ring 1) SIzE RANGE <= 24” >= 26” Weld neck
ahlsell 65
66 ahlsell
FLANGes mss sP-44 FLANGES MSS SP-44 ahlsell 67
FLANGes MSS SP-44 CLASS 150 FLANGES mss sP-44 DIMENSIONS FOR MSS SP-44 CLASS 150 FLANGES (mm) Flange dim. Hub dimension RF dimen
mss sP-44 MSS SP-44 CLASS 300 FLANGES FLANGes DIMENSIONS FOR MSS SP-44 CLASS 300 FLANGES (mm) Flange dimension Hub dimension RF
FLANGes MSS SP-44 CLASS 400 FLANGES mss sP-44 DIMENSIONS FOR MSS SP-44 CLASS 400 FLANGES (mm) Flange dimension Hub dimension RF
mss sP-44 MSS SP-44 CLASS 600 FLANGES FLANGes DIMENSIONS FOR MSS SP-44 CLASS 600 FLANGES (mm) Flange dimension Hub dimension RF
FLANGes MSS SP-44 CLASS 900 FLANGES mss sP-44 DIMENSIONS FOR MSS SP-44 CLASS 900 FLANGES (mm) Flange dimension Hub dimension RF
mss sP-44 FLANGes TOLERANCES MSS SP-44 - 2006 Denomination O B H Description Outside diameter flange ring - note 1 Inside diamet
74 ahlsell
FLANGes API 6A FLANGES - API 6A ahlsell 75
FLANGes API 6A - type 6B flanges Weld neck, Threaded and Integral flanges are available in 2000, 3000 and 5000 psi rating API 6A
API 6A - tyPe 6B FLANGes ahlsell 77
FLANGes API 6A - type 6BX flanges Weld neck, Blind and Test flanges are available in 10.000, 15.000 and 20.000 psi rating Integr
API 6A - tyPe 6Bx FLANGes ahlsell 79
80 ahlsell
FORGeD FIttINGs Asme B16.11 Bs3799 FORGED FITTINGS ahlsell 81
FORGeD steeL FIttINGs 90° ELBOWS - THREADED - B16.11 Rating tHReADeD Dims 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1 1⁄4” 1 1⁄2” 2” 2 1⁄2” 3”
tHReADeD TEES - THREADED - B16.11 Tees – Equal and reducing Rating Dims 1/8” 1/4” 3/8” 1/2” 3/4” 1” FORGeD steeL FIttINGs 1 1⁄4”
FORGeD steeL FIttINGs COUPLINGS - THREADED - B16.11 Rating Dims 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1 1⁄4” 1 1⁄2” 2” 2 1⁄2” 3” 4” tHReAD
tHReADeD FORGeD steeL FIttINGs STREET ELBOWS - MALE/ FEMALE - THREADED - B16.11 Rating Dims 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1 1⁄4” 1
FORGeD steeL FIttINGs PIPE NIPPLES - THREADED - BS3799 1/8” 1/4” 3/8” 1/2” 3/4” Length ‘L’ Pipe wall: End Types 3000lbs - XS 600
tHReADeD FORGeD steeL FIttINGs UNIONS - MALE X FEMALE (MF), THREADED X 2, THREADED + SOCKET WELDED Rating Dims 1/8” 1/4” 3/8” 1/
FORGeD steeL FIttINGs SWAGED NIPPLES tHReADeD/sOCKet WeLD Large end dimensions 3/8” 1/2” 3/4” 1” 1 1⁄2” 2” 2 1⁄2” 3” 4” Length 7
sOCKet WeLD FORGeD steeL FIttINGs 45°ELBOWS - SOCKET WELD - B16.11 Rating Dims 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1 1⁄4” 1 1⁄2” 2” 2 1⁄
FORGeD steeL FIttINGs CROSSES - SOCKET WELD - B16.11 Rating Dims 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1 1⁄4” 1 1⁄2” 2” 2 1⁄2” 3” 4” sOCKe
sOCKet WeLD REDUCING INSERT 3000LB - SOCKET WELD Type 1 1/2” 1/2” 3/4” 3/4” 3/4” 1” 1” 1” 1” 1 1⁄4” 1 1⁄4” 1 1⁄4” 1 1⁄4” 1 1⁄4”
FORGeD steeL FIttINGs sOCKet WeLD CAPS -SOCKET WELD - B16.11 Rating Dims 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1 1⁄4” 1 1⁄2” 2” 2 1⁄2” 3”
tHReADs FORGeD steeL FIttINGs TAPER PIPE THREADS, NPT Nominal size of tube Outside diameter of the tube D mm 1⁄8 1⁄4 3⁄8 1⁄2 3⁄4
94 ahlsell
O-Lets O-LETS ahlsell 95
O-Lets BRANCH OUTLETS – O´LETS. BASIS FOR DESIGN OF O´LETS: MANUFACTURER STANDARD: The O´lets in this catalogue are based on a s
O-Lets Ready to Weld Every fitting is shaped to fit the pipe and it self-aligning. butt-welding of the branch pipe for shop or f
O-Lets DIMENSIONS UNIFICATION In order to reduce warehouse inventory, our outlets have been unified to fit on different run-pipe
O-Lets BUTTWELD OUTLETS - STANDARD REDUCED SIzES OUTLET SIzE [inch] A [mm] C [mm] Approx. Weight FULL SIzES A [mm] C [mm] D [mm]
O-Lets Buttweld outletS • ScH. 160 ANd XXS REDUCED SIzES OUTLET SIzE [inch] 1⁄2 3⁄4 1 1 1⁄4 1 1⁄2 2 2 1⁄2 3 4 5 6 A [mm] FULL SI
Page 1:
Pipes • Tubes • Fittings • Flang
Page 2:
Page 3:
ConTenTs 1. INTRODUCTION Presentation of Ahlsell Oil & Gas AS Ty
Page 4:
CoMPAnY PResenTATIon How to contact us Stavanger Office Phone: +
Page 5:
CoMPAnY PResenTATIon Ahlsell Oil & Gas AS was in 2007 demerged f
Page 6:
Types of pipes, fittings and flanges in stock Sizes and material
Page 7:
Austenittic Stainless steel - Type 316/316L Product Seamless pip
Page 8:
TyPes oF PiPes, FiTTings and Flanges in sTock High strength Aust
Page 9:
ahls
Page 10:
10 ah
Page 11:
PIPES PIPes AsMe B36.10
Page 12:
PiPe schedule charT [inch] ASME B36.19-B36.10 – pipe dimensions
Page 13:
PiPe schedule charT [mm] ASME B36.19-B36.10 DN (MM) NPS (INCH) O
Page 14:
PiPes ASME B 36.10 DIMENSIONS SIzE IN. line PiPes WALL THICkNESS
Page 15:
line PiPes ASME B 36.10 DIMENSIONS SIzE IN. PIPes WALL THICkNESS
Page 16:
PiPes ASME B 36.10 DIMENSIONS SIzE IN. line PiPes WALL THICkNESS
Page 17:
line PiPes ASME B 36.10 DIMENSIONS SIzE IN. PIPes WALL THICkNESS
Page 18:
PiPes ASME B 36.10 DIMENSIONS SIzE IN. line PiPes WALL THICkNESS
Page 19:
ahlse
Page 20:
20 ah
Page 21:
TuBes AsTM A269 AsTM
Page 22:
TuBing meTric sizes & Pressure in Bar FACTOR CHART FOR PRESSURE
Page 23:
meTric sizes & Pressure in Bar WORkING PRESSURE FOR SEAMLESS AST
Page 24:
TuBing FracTional sizes & Pressure in Psi FACTOR CHART FOR PRESS
Page 25:
FracTional sizes & Pressure in Psi WORkING PRESSURE FOR SEAMLESS
Page 26:
26 ah
Page 27:
BuTT-Weld FiTTings BUTT-WELD FITTINGS AsM
Page 28:
28 ah
Page 29:
asme B16.9/ mss sP–75 Long radius elbows 90° long radius elbow B
Page 30:
BuTT-Weld FiTTings Tees Equal Tees asme B16.9/ mss sP–75 ASME B1
Page 31:
asme B16.9/ mss sP–75 Tees Reducing Outlet Tees BuTT-Weld FiTTin
Page 32:
BuTT-Weld FiTTings REDUCING OUTLET TEES (dimensions in mm) – con
Page 33:
asme B16.9/ mss sP–75 REDUCING OUTLET TEES (dimensions in mm) –
Page 34:
BuTT-Weld FiTTings REDUCING OUTLET TEES (dimensions in mm) – con
Page 35:
asme B16.9 Long Radius Bends BuTT-Weld FiTTings Long Radius Retu
Page 36:
BuTT-Weld FiTTings Reducers Concentric and eccentric reducers as
Page 37:
asme B16.9/ mss sP–75 REDUCERS (dimensions in mm) - continued AS
Page 38:
BuTT-Weld FiTTings Stub Ends Lap-Joint Stub Ends asme B16.9/ mss
Page 39:
asme B16.9/ mss sP–75 BuTT-Weld FiTTings End Caps END CAPS (dime
Page 40:
BuTT-Weld FiTTings Short radius elbows ASME B16.28 [mm] N.B. (in
Page 41:
asme B16.9 / mss sP–75 Bevel types Welding Bevel For Fittings –
Page 42:
BuTT-Weld FiTTings Tolerances mss sP–75 TOLERANCE (mm) FOR MSS S
Page 43:
asme B16.9/ B16.28 TOLERANCES - ASME B16.9/B16.28 90-Deg and 45-
Page 44:
44 ah
Page 45:
maniFold FiTTings MANIF
Page 46:
46 ah
Page 47:
maniFold FiTTings Designed to meet international standard Manifo
Page 48:
48 ah
Page 49:
Flanges asme B16.5 FLANG
Page 50:
PiPe Flanges CLASS 150 FLANGES asMe B16.5 DIMENSIONS OF CLASS 15
Page 51:
AsMe B16.5 CLASS 150 FLANGES PiPe Flanges k min. P O W R DIMENSI
Page 52:
PiPe Flanges CLASS 300 FLANGES asMe B16.5 DIMENSIONS OF CLASS 30
Page 53:
AsMe B16.5 CLASS 300 FLANGES PiPe Flanges k min. P O W R DIMENSI
Page 54:
PiPe Flanges CLASS 400 FLANGES asMe B16.5 DIMENSIONS OF CLASS 40
Page 55:
AsMe B16.5 CLASS 400 FLANGES PiPe Flanges k min. P O W R DIMENSI
Page 56:
PiPe Flanges CLASS 600 FLANGES asMe B16.5 DIMENSIONS OF CLASS 60
Page 57:
AsMe B16.5 CLASS 600 FLANGES PiPe Flanges k min. P O W R DIMENSI
Page 58:
PiPe Flanges CLASS 900 FLANGES asMe B16.5 DIMENSIONS OF CLASS 90
Page 59:
AsMe B16.5 CLASS 900 FLANGES PiPe Flanges k min. P O W R DIMENSI
Page 60:
PiPe Flanges CLASS 1500 FLANGES asMe B16.5 DIMENSIONS OF CLASS 1
Page 61:
AsMe B16.5 CLASS 1500 FLANGES PiPe Flanges k min. P O W R DIMENS
Page 62:
Asme B16.5 CLASS 2500 FLANGES PIPe FLANGes DIMENSIONS OF CLASS 2
Page 63:
PIPe FLANGes CLASS 2500 FLANGES Asme B16.5 K min. P O W R DIMENS
Page 64:
Asme B16.5 Tolerances B16.5 - 2003 DENOMINATION O DESCRIPTION Ou
Page 65:
ahlse
Page 66:
66 ah
Page 67:
FLANGes mss sP-44 FLANG
Page 68:
FLANGes MSS SP-44 CLASS 150 FLANGES mss sP-44 DIMENSIONS FOR MSS
Page 69:
mss sP-44 MSS SP-44 CLASS 300 FLANGES FLANGes DIMENSIONS FOR MSS
Page 70:
FLANGes MSS SP-44 CLASS 400 FLANGES mss sP-44 DIMENSIONS FOR MSS
Page 71:
mss sP-44 MSS SP-44 CLASS 600 FLANGES FLANGes DIMENSIONS FOR MSS
Page 72:
FLANGes MSS SP-44 CLASS 900 FLANGES mss sP-44 DIMENSIONS FOR MSS
Page 73:
mss sP-44 FLANGes TOLERANCES MSS SP-44 - 2006 Denomination O B H
Page 74:
74 ah
Page 75:
FLANGes API 6A FLANGE
Page 76:
FLANGes API 6A - type 6B flanges Weld neck, Threaded and Integra
Page 77:
API 6A - tyPe 6B
Page 78:
FLANGes API 6A - type 6BX flanges Weld neck, Blind and Test flan
Page 79:
API 6A - tyPe 6Bx
Page 80:
80 ah
Page 81:
FORGeD FIttINGs Asme B16.11 Bs
Page 82:
FORGeD steeL FIttINGs 90° ELBOWS - THREADED - B16.11 Rating tHRe
Page 83:
tHReADeD TEES - THREADED - B16.11 Tees – Equal and reducing Rati
Page 84:
FORGeD steeL FIttINGs COUPLINGS - THREADED - B16.11 Rating Dims
Page 85:
tHReADeD FORGeD steeL FIttINGs STREET ELBOWS - MALE/ FEMALE - TH
Page 86:
FORGeD steeL FIttINGs PIPE NIPPLES - THREADED - BS3799 1/8” 1/4”
Page 87:
tHReADeD FORGeD steeL FIttINGs UNIONS - MALE X FEMALE (MF), THRE
Page 88:
FORGeD steeL FIttINGs SWAGED NIPPLES tHReADeD/sOCKet WeLD Large
Page 89:
sOCKet WeLD FORGeD steeL FIttINGs 45°ELBOWS - SOCKET WELD - B16.
Page 90:
FORGeD steeL FIttINGs CROSSES - SOCKET WELD - B16.11 Rating Dims
Page 91:
sOCKet WeLD REDUCING INSERT 3000LB - SOCKET WELD Type 1 1/2” 1/2
Page 92:
FORGeD steeL FIttINGs sOCKet WeLD CAPS -SOCKET WELD - B16.11 Rat
Page 93:
tHReADs FORGeD steeL FIttINGs TAPER PIPE THREADS, NPT Nominal si
Page 94:
94 ah
Page 95:
O-Lets O-LET
Page 96:
O-Lets BRANCH OUTLETS – O´LETS. BASIS FOR DESIGN OF O´LETS: MANU
Page 97:
O-Lets Ready to Weld Every fitting is shaped to fit the pipe and
Page 98:
O-Lets DIMENSIONS UNIFICATION In order to reduce warehouse inven
Page 99:
O-Lets BUTTWELD OUTLETS - STANDARD REDUCED SIzES OUTLET SIzE [in
Page 100:
O-Lets Buttweld outletS • ScH. 160 ANd XXS REDUCED SIzES OUTLET
Ahlsell
For å vise denne siden trenger du Adobe Flash Player og nettleseren må tillate javaScripts.
Klikk her for å hente den nyeste Adobe Flash Player.